How to read a METAR and TAF report, group by group
Read a METAR left to right: station, time, wind, visibility, weather, clouds, temperature over dew point, altimeter, remarks. The groups look dense at first, but reading one gets fast once they stop looking like noise. A TAF reuses the same codes for a forecast period and adds change groups — FM, BECMG, TEMPO, PROB. E6B Calc's METAR & TAF Decoder turns a pasted report into plain language offline, 3 free decodes before E6B Pro kicks in.
A sample METAR, decoded
Made up for practice, this one, not a real observation: METAR KDEN 241753Z 20012G22KT 10SM FEW080 SCT200 31/04 A3012 RMK AO2 SLP101 T03060044
| Group | Meaning |
|---|---|
| KDEN | Station identifier (ICAO code) |
| 241753Z | Day 24 of the month, 1753 Zulu |
| 20012G22KT | Wind from 200° true at 12 kt, gusting 22 kt |
| 10SM | Visibility 10 statute miles (outside the US, 4 digits in metres, or CAVOK) |
| FEW080 SCT200 | Few clouds at 8,000 ft and scattered at 20,000 ft above ground: no ceiling |
| 31/04 | Temperature 31 °C, dew point 4 °C |
| A3012 | Altimeter setting 30.12 inHg (Q groups, such as Q1013, are hPa) |
| RMK AO2 | Remarks: automated station with a precipitation sensor |
| SLP101 | Sea-level pressure 1010.1 hPa |
| T03060044 | Exact temperature 30.6 °C and dew point 4.4 °C |
A ceiling is the lowest broken (BKN) or overcast (OVC) layer, or vertical visibility (VV) — not FEW, not SCT, no matter how it looks out the window. Weather codes stack intensity and type: -RA light rain, +TSRA heavy thunderstorm with rain, BR mist, FG fog. BR and FG are easy to mix up; the decoder doesn't.
Flight categories
FAA categories take the worse of ceiling and visibility: VFR above 3,000 ft and 5 SM, MVFR 1,000–3,000 ft or 3–5 SM, IFR 500 ft to under 1,000 ft or 1 to under 3 SM, LIFR under 500 ft or under 1 SM. The sample above is VFR, comfortably.
How to read a TAF
A TAF opens with station, issue time and a validity period like 2418/2524 — 24th at 1800Z to the 25th at 2400Z — then a base forecast in the same METAR codes. The change groups after it are where most of the useful information actually lives:
- FM: from this time on, a new set of conditions replaces the old one.
- BECMG: a gradual change over the period given.
- TEMPO: temporary fluctuations lasting less than an hour at a time, in total less than half the period.
- PROB30 or PROB40: a 30 % or 40 % chance of the conditions that follow.
Decode a report in E6B Calc
- Copy the METAR or TAF from your briefing source.
- On E6B, open METAR & TAF Decoder under Weather and paste it into the box, or type it.
- Read the cards: Wind, Visibility, Weather, Sky, Ceiling, Flight category, temperature, dew point and Altimeter setting in your chosen unit. A TAF gets one card per change group.
- Tap Full decode for a plain-English line-by-line reading.
- For a METAR, tap Use this report, add field elevation, runway heading and magnetic variation, and get pressure altitude, density altitude, cloud base and runway crosswind.
The sample in numbers
| Result | Value |
|---|---|
| Pressure altitude | 5,250 ft |
| Density altitude | 8,170 ft |
| Cloud base AGL | 10,500 ft |
| Crosswind | 8 kt from the right |
| Head/tailwind | 20 kt headwind |
Note it uses the 22 kt gust for the components, not the 12 kt steady wind, and the true wind of 200° becomes 192° magnetic before it ever gets compared to the runway heading. Temperature, meanwhile, comes from the sharper T-group rather than the rounded 31/04 up front.
What the decoder does not do
- It never downloads reports: you paste them, so it works without signal.
- The Full decode text is in English only.
- Flight categories follow the US FAA thresholds.
- If a report has a group it does not recognise, it shows Could not decode this report and names the group instead of showing a half-decoded result. A failed decode does not use a free visit.
- It is hidden while Exam mode is on.
Sources & method
Figures and facts on this page come from the references above and from testing in our own apps. How we write and check guides
Questions and answers
Is the METAR decoder free?
What does AO2 mean in a METAR?
Are METAR winds true or magnetic?
Does it work with reports outside the US?
You might also like
- How to calculate crosswind and headwind components, including the gust · E6B Calc
- How to calculate density altitude from pressure altitude and temperature · E6B Calc
More E6B Calc guides
- How to calculate crosswind and headwind components, including the gust
- How to calculate true airspeed from calibrated airspeed (and Mach)
- How do you calculate the great-circle distance between two coordinates?
- How do you calculate climb gradient as a percentage?
- How do you put a Zulu time widget on your iPhone?
- All questions about E6B Calc
- Back to E6B Calc