MasaApps360
English
FieldGridFieldGrid

What is my Maidenhead locator (QTH)?

Take your latitude and longitude and the grid does the rest: Munich, 48.14666 N 11.60833 E, is JN58td. The calculator below gives the 4, 6 or 8 character locator for any point, or turns a locator back into the centre of its square. Everything is WGS 84, the same datum as GPS.

3 min read · Updated

Download on the App Store Get it on Google Play Android: MGRS GPS: Military Grid & UTM

How a locator is built

A Maidenhead locator is a short code that names a rectangle of the Earth. It alternates letters and digits in pairs, and every pair narrows the rectangle. In each pair the longitude comes first, then the latitude.

Maidenhead locator lengths and the rectangle each one names
CharactersExampleSize (lon × lat)About, at 48° N
2 (field)JN20° × 10°1,500 × 1,100 km
4 (square)JN582° × 1°150 × 110 km
6 (subsquare)JN58td5′ × 2.5′6.2 × 4.6 km
8 (extended)JN58td2530″ × 15″620 × 460 m

Reading JN58td

  • JN is the field. J is the 10th of 18 letters for longitude (A starts at 180° W), so 0° to 20° E. N is the 14th for latitude (A starts at 90° S), so 40° to 50° N.
  • 58 is the square: 2° of longitude per digit, so 5 means 10° to 12° E; 1° of latitude per digit, so 8 means 48° to 49° N.
  • td is the subsquare, in 5′ of longitude and 2.5′ of latitude steps: t is 11°35′ to 11°40′ E and d is 48°07.5′ to 48°10′ N. Munich's centre sits inside it.

Convert your coordinates

Paste or type latitude and longitude, choose how many characters you want, and read the locator. Southern latitudes and western longitudes are negative.

Maidenhead locator (QTH) from latitude and longitude, and back

Locator
JN58td
Size of the square
5′ × 2.5′ (≈ 6.2 × 4.6 km)
Centre of the square
48.14583, 11.62500
Centre of that locator (lat, lon)
48.14583, 11.62500
Size of the square
5′ × 2.5′ (≈ 6.2 × 4.6 km)

Showing the worked example. Turn on JavaScript to calculate your own numbers.

Maidenhead on WGS 84: 18 × 18 fields of 20° × 10°, then 10 × 10 squares, 24 × 24 subsquares and 10 × 10 extended squares. A locator names a rectangle, not a point, so the centre of that rectangle is shown; 6 characters is about 5′ × 2.5′ and 8 characters about 30″ × 15″ (a few hundred metres). The first two pairs are the part radio logs usually exchange.

Get the numbers from FieldGrid

  1. Open FieldGrid on the Map tab: the big line is your position.
  2. Open the gear, then Settings, and set Primary to Lat / Lon.
  3. Tap the big line to copy the two numbers, then paste them into the Latitude box above. The calculator splits them for you. FieldGrid writes five decimals, about 1 m, far finer than a locator needs.

Or let FieldGrid show it

  1. Open FieldGrid, then the gear and Settings.
  2. Set Primary to Maidenhead. The big line on the Map tab now shows your locator live, with no calculator.
  3. Use Maidenhead length to pick 4, 6 or 8 characters. To check a locator someone gave you, type it in GOTO: FieldGrid reads it back as a point.

Locator back to coordinates

Type JN58td in the second box and you get 48.14583, 11.62500: the centre of that rectangle. It can be up to about 4 km from where you stood, because a 6-character square is 6.2 × 4.6 km wide at this latitude; an 8-character one narrows that to about 400 m.

Mistakes that give a wrong locator

  • Swapping the numbers. The first pair of a locator is longitude, so latitude and longitude in the wrong order land you in another field.
  • Dropping the minus sign. 72.72713° W is -72.72713; typed as 72.72713 it is in Asia.
  • Shortening by hand. A locator is a square, so rounding 41.7146 to 41.7 can cross a boundary. Convert the full numbers, then cut the locator.

Questions and answers

Can FieldGrid show my locator by itself?
Yes. Set Primary to Maidenhead in Settings and the Map tab shows it live, offline, from the phone's GPS.
Is a Maidenhead locator the same as a grid square?
Yes. Grid square usually means the 4-character locator, like JN58. The 6-character locator, like JN58td, is the subsquare inside it.
How many characters should I use?
Most logs use 4 or 6 characters. Use 8 only when the other side asks for it, because it narrows the place to a few hundred metres.
Which datum does the calculator use?
WGS 84, the same as GPS. A paper map in another datum can differ by a few hundred metres, which seldom changes a 6-character locator.
Why is the point I get back not where I was?
The reverse conversion returns the centre of the rectangle. Your real spot is somewhere inside it.

You might also like

More FieldGrid guides