Pool LSI calculator: is your water aggressive or scaling?
The Langelier Saturation Index adds up pH, temperature, calcium hardness and alkalinity (corrected for stabilizer) and subtracts a constant. Below -0.3 the water is aggressive, above +0.3 it is scaling, and in between it is balanced. The Water Index screen does it from five numbers off a strip.
What does the Langelier index tell you?
Aggressive water wants to dissolve things: plaster, grout, metal fittings. Scaling water drops calcium out as a crust on tiles and heaters. An index near zero means neither is pulling hard.
How does PoolDose calculate it?
- Index = pH + temperature factor + hardness factor + alkalinity factor - 12.1.
- The three factors are read from published tables and interpolated between the table points.
- Alkalinity is corrected first: stabilizer divided by three is subtracted before the lookup, with a floor of 4.
- The constant is 12.1 for water under 1,000 ppm of dissolved solids, and the app always assumes 300 ppm. It never asks for that figure, so a salt pool with more dissolved solids is only approximated.
How do I use the Water Index screen?
- Open Calculator > Water Index.
- Under Your test strip, fill in pH, the temperature, Calcium hardness (ppm), Total alkalinity (ppm) and Stabilizer / CYA (ppm).
- Read the number under Langelier Saturation Index and the line below it: Water is aggressive, Water is balanced or Water is scaling.
- Read the small note under it. It names the first thing outside range: alkalinity outside 60-120 ppm, then pH outside 7.2-7.6, then calcium hardness outside 200-400 ppm.
| pH | Temp | Calcium hardness | Alkalinity | Index | Result and first fix |
|---|---|---|---|---|---|
| 7.4 | 25 °C | 250 | 80 | -0.32 | Aggressive, note says nothing obviously out of range |
| 8.0 | 30 °C | 400 | 150 | +0.88 | Scaling, fix alkalinity first |
| 7.0 | 20 °C | 150 | 60 | -1.18 | Aggressive, fix pH first |
| 7.4 | 28 °C | 300 | 100 | -0.07 (CYA 40) | Balanced |
The first row is the screen's own starting set, and it lands just under the -0.3 line. Raise the temperature to 80 °F (26.7 °C) and the same water reads -0.29, balanced. The index is a guide to a trend, not a verdict on a single reading.
Sources & method
Figures and facts on this page come from the references above and from testing in our own apps. How we write and check guides