Can an iPhone detect EMF? The EMF Detector in Spirit Box
Partly. An iPhone has a magnetometer, the compass sensor, which reads the magnetic field in microtesla (µT). It cannot pick up the alternating fields from mains wiring that a dedicated EMF meter reads. Spirit Box's free EMF Detector shows that reading live, with a colour dial, a baseline you set yourself and a spike counter.
What the iPhone can and cannot measure
The magnetometer reports the field along three axes and the app combines them into one total, the square root of x² + y² + z². Earth's own field keeps that total at a few dozen µT almost anywhere, so a reading of zero never happens. As a magnetometer reader it genuinely works: it reacts to magnets, steel furniture, a phone case with a magnet in it, speakers and chargers. As a meter for the alternating fields around household wiring it does not, and nothing here is calibrated against anything.
The EMF Detector in Spirit Box
On the home screen, the EMF Detector card sits next to Spirit Board. It is free, it is not a session and it does not use up your daily session count. A dial shows the reading in µT with one decimal, a level word and a colour. The sensor runs only while the screen is open. On a device with no magnetometer the screen says so instead of showing a dial.
| Reading (µT) | Level shown | Dial colour |
|---|---|---|
| under 20 | Very Low | grey |
| 20 to 39.9 | Low | blue |
| 40 to 54.9 | Normal | green |
| 55 to 69.9 | Elevated | yellow |
| 70 to 84.9 | High | orange |
| 85 and above | Spike! | red |
The reading is smoothed: the app samples the sensor 30 times a second and shows a weighted average of the last 10 readings, newest counting most. For example, a sample of x = 20, y = -30, z = 25 µT gives a total of 43.87 µT. With the last ten totals at 44.0, 44.5, 45.0, 44.8, 45.2, 45.1, 44.9, 45.3, 52.0 and 58.0, the value shown is 48.5 µT, level Normal. The dial fills in proportion to the 0 to 100 µT scale, so 48.5 µT is about half way.
Calibrate, then watch for spikes
- Open the EMF Detector card and put the phone down away from routers, speakers, chargers and metal furniture. Take off any magnetic case.
- Tap Calibrate and keep the phone still for 3 seconds. The button reads Calibrating… while it averages the readings; the average becomes your baseline.
- Read the line under the dial: it shows how many µT you are above or below the baseline. The baseline is remembered next time you open the screen, so calibrate again in every new spot.
- Tap the gear icon to change the Spike alert, from +5 to +40 µT in steps of 1 (the default is +15 µT). Reset spike counter sets the count back to zero.
- Walk the phone slowly toward the thing you want to check and watch the Last 60 seconds graph, which draws your readings against a dashed baseline.
A spike is counted when the reading rises to the alert level above your baseline: the phone vibrates, the screen flashes red for a moment and the counter goes up by one. It counts once. It can only count again after the reading has fallen below 60% of the alert level above the baseline. The level word Spike! is a different thing, a fixed 85 µT and above, whatever your baseline.
| Reading (µT) | Above baseline (µT) | Level shown | Spikes counted |
|---|---|---|---|
| 52.0 | +7.0 | Normal | 0 |
| 60.0 | +15.0 | Elevated | 1 |
| 66.0 | +21.0 | Elevated | 1 |
| 56.0 | +11.0 | Elevated | 1 |
| 53.0 | +8.0 | Normal | 1 |
| 61.0 | +16.0 | Elevated | 2 |
Two buttons under the graph write to the journal: Log spike (active once a spike has happened) and Save reading. Each makes an entry tagged EMF with the reading, baseline and change, plus an optional note, and it counts toward the free journal limit. The EMF Detector does not create a session, so nothing appears in Session History.
Energy ITC: the PRO version that also speaks words
Energy ITC reads the same sensor and the same smoothed value, but it judges spikes differently: against the last 50 smoothed readings, in standard deviations. With a baseline of 45.0 µT and a spread of 1.5 µT, a reading of 51.0 µT is 4 spreads above normal, a significant spike, and shows SPIKE DETECTED. Stronger readings and spikes make its random words more likely and more frequent. It is a PRO module, and you can try it once free with Watch an ad to try a full PRO session.
| Spreads above baseline | Spike |
|---|---|
| 2 | minor |
| 3 | moderate |
| 4 | significant |
| 6 | major |
Run the EMF Response Test
- Open the home menu, tap Protocols and pick EMF Response Test (7-10 min).
- Move away from routers, speakers and power adapters, and take off any magnetic phone case.
- Open the EMF Detector, tap Calibrate and wait for the reading to settle. With PRO you can use Energy ITC instead, from PRO ITC Modules: tap Start, then choose an Output Mode.
- Ask for a response within a 10-second window and stay still.
- Repeat the same request three times and compare the spike counter, or the words, each time.
Common mistakes
- Holding the phone yourself. Your own hand moving or turning it changes the reading more than anything else in the room.
- Setting it down near a fridge, radiator, laptop or speaker without noticing. Metal and magnets shift the number quietly.
- Treating any single number as meaningful on its own. Only a change against a settled baseline says anything, and it usually has an ordinary cause.
Questions and answers
What is a normal EMF reading on an iPhone app?
Are EMF apps accurate?
Can the app measure EMF from wiring?
Why did I get a spike when nothing happened?
You might also like
- How to use your iPhone as an EMF meter · GhostScope
More Spirit Box guides
- How to use a spirit box app on iPhone, step by step
- How to do the Estes Method on your phone with Ghost Box
- How to record EVP on iPhone, bookmark moments and review them
- Ouija board app for iPhone: how it works, and is it real?
- LiDAR ghost hunting app: what a depth scan can and can't show
- All questions about Spirit Box
- Back to Spirit Box