MasaApps360
English
DuctCalc: HVAC Ductulator app icon

DuctCalc, the ductulator app for HVAC installers

CFM, BTU & Tons Duct Sizing

DuctCalc is a ductulator you can keep in your pocket. Type the airflow and a friction rate, and it gives the round duct, the stock size above it and the rectangular pairs that fit. Everything that sizes or checks a duct is free, with no ads on iPhone and iPad.

Download on the App Store Get it on Google Play Android: Duct Calculator: HVAC Sizing
On a computer? Scan with your phone camera to install.
Version 1.3.1 Updated 2026-11-09Requires iOS 17.0Size 3 MBPrice Free For iPhone, iPad and Android
  1. DuctCalc: HVAC Ductulator screenshot 1
  2. DuctCalc: HVAC Ductulator screenshot 2
  3. DuctCalc: HVAC Ductulator screenshot 3
  4. DuctCalc: HVAC Ductulator screenshot 4
  5. DuctCalc: HVAC Ductulator screenshot 5
  6. DuctCalc: HVAC Ductulator screenshot 6

What can you do with it?

  • Size a duct: enter Airflow plus either a Friction rate or a Target velocity. You get the Required round duct, the Use stock duct size line with its real velocity and friction, and a list of Rectangular equivalents.
  • Check a duct: enter the airflow and a Round duct diameter, or the Width and Height of a Rectangular duct, and read the Air velocity and Friction rate it runs at.
  • Pick the Material: Galv. steel, Duct board or Flex duct. The roughness differs, so the friction rate and the size change.
  • A velocity badge under every answer rates the air speed against six applications, for example Residential · supply-air branch.
  • The Reference tab holds the velocity bands, an airflow-per-ton table, round-to-rectangular pairs and the material roughness values.

Quick start: size your first duct

  1. Open the Ductulator tab and keep Size a duct selected.
  2. Type 400 in Airflow. The Friction rate field already holds 0.1 in.wg/100ft.
  3. Read Required round duct: 9.7 in. Below it, Use stock duct size says 10 in, at 733 fpm and 0.086 in.wg/100ft.
  4. Scroll to Rectangular equivalents for 10 x 8, 14 x 6 and 24 x 4.
  5. Tap Copy result to paste the answer into a message. The calculation also lands in History on its own.

What is free and what needs Pro

Free to download and to use: both directions, stock sizes, rectangular equivalents, all three materials, the velocity badge, the Reference tab, imperial and metric, and the last ten calculations. There are no ads on iPhone and iPad; the free Android version shows banner and interstitial ads, and Pro removes them. DuctCalc Pro is a single purchase, not a subscription, and it does two things: History keeps every calculation instead of the last ten, and Share duct schedule sends the whole history as one plain-text list, with the names you gave each run.

Offline, no account

Every calculation runs on the phone, so a mechanical room with no signal is fine. There is no sign-up and no account. On iPhone and iPad there is no tracking prompt either, and the only thing that touches the network is the App Store, for buying or restoring Pro; the free Android version also loads ads. History stays on the device.

Inches or millimetres

Under Settings > Units choose Imperial (CFM, inches, fpm, in.wg/100ft) or Metric (mm, m/s, Pa/m, with the airflow in L/s or m³/h through Airflow unit). The numbers already typed convert when you switch.

What it does not do

  • Standard air only, 20 °C at sea level. No altitude or temperature correction.
  • Straight duct at a friction rate: no fittings, no equivalent lengths, no total static pressure, no fan selection.
  • No flat oval, no PDF export, no iCloud, no widgets, no Apple Watch app.
  • Size mode solves a diameter from an airflow. It has no field that solves airflow from a diameter; use Check a duct and adjust the airflow.

Questions people ask about DuctCalc

Is DuctCalc free?
Yes. Sizing, checking, stock sizes, rectangular equivalents, all materials, the velocity badge, the Reference tab and metric are free (no ads on iPhone and iPad). Pro is one optional purchase that lifts the ten-calculation history limit and adds sharing the duct schedule.
Does it work without internet?
Yes. Every calculation and table runs on the phone. The network is only used when you buy or restore Pro (App Store or Google Play) and, in the free Android version, to load ads.
Does it work on iPad?
Yes, it runs on iPhone and iPad with the same four tabs. There is also an Android version on Google Play. There is no Mac or Apple Watch version.
Can I use metric?
Yes. Set Settings > Units > Unit system to Metric and pick L/s or m³/h as the airflow unit. Diameters and widths are in millimetres, velocity in m/s and friction in Pa/m.
Is it as accurate as a ductulator wheel?
It uses the same physics the friction chart is drawn from, for standard air and galvanized roughness. Its checks against hand-read wheel values hold within half an inch, and a printed power-law fit can read about a tenth of an inch off. It is a design aid, not a substitute for the engineer's numbers.

Read all the questions and answers →

Free and Pro

Free

  • Size a duct (CFM + friction rate or target velocity -> exact round diameter, stock size, rectangular equivalents)
  • Check a duct (round or rectangular -> velocity, friction rate, equivalent round diameter)
  • All three materials: galvanized steel, duct board, flex duct
  • Velocity badge with six applications (residential/commercial x supply main, supply branch, return)
  • Reference tab: recommended velocities, airflow per ton, round to rectangular, friction rate notes, material roughness
  • Imperial and metric (L/s or m3/h), switchable any time
  • Copy result
  • History of the last 10 calculations, reopen and name them

Pro

  • History without the 10-calculation limit (all calculations are kept)
  • Share duct schedule: the whole history as one plain-text schedule, grouped by day, through the iOS share sheet

Pro is optional. Everything in the free list works without it.

What's new in 1.3.1

Now available in 39 languages. Small improvements.

Privacy and support

DuctCalc does not require an account. Read the privacy policy and the terms for this app, or write to us if something is wrong.

Made by a small independent developer. Questions? Write to us from the support page.