MasaApps360
English
E6B CalcE6B Calc

How do you calculate when to start your descent?

Divide the altitude to lose by your descent rate to get minutes, then multiply by ground speed over 60 to get distance. Losing 10,000 ft at 1,500 fpm and 250 kt means starting 27.8 nm out. E6B Calc's Climb & Descent screen gives both numbers.

2 min read · Updated

The formula

Time to descend in minutes is altitude to lose in feet divided by rate of descent in fpm. Distance to start down is ground speed in knots times that time, divided by 60. Use ground speed, not airspeed: a tailwind pushes the top of descent further out.

Worked examples (computed)
Altitude to loseRateGround speedTimeDistance
4,000 ft500 fpm100 kt8.0 min13.3 nm
6,000 ft700 fpm140 kt8.6 min20.0 nm
10,000 ft1,500 fpm250 kt6.7 min27.8 nm
15,000 ft2,000 fpm300 kt7.5 min37.5 nm

The 3:1 rule of thumb

Multiply the thousands of feet to lose by 3 and you get the distance in nautical miles. It describes a path of about 2.9 degrees, or 333 ft per nm.

3:1 rule
Altitude to loseStart down at
5,000 ft15 nm
10,000 ft30 nm
15,000 ft45 nm
20,000 ft60 nm

The rate you then fly is about ground speed times 5: 120 kt wants roughly 600 fpm, 250 kt roughly 1,250 fpm.

Get it in E6B Calc

  1. On E6B, open Climb & Descent under Performance.
  2. Type Altitude to change in feet, your Ground speed and the Rate in fpm.
  3. Read Time and Distance covered: that distance is how far from the fix you start down.

The other way round: what rate do I need?

If air traffic control gives you a fix and an altitude, fill Distance to the fix as well. The screen then shows Required descent rate. With 6,000 ft to lose, a fix 20 nm ahead and 140 kt, it reads 700 fpm.

Questions and answers

How do you calculate top of descent?
Altitude to lose divided by rate of descent gives minutes. Multiply the minutes by ground speed and divide by 60 to get the distance in nautical miles.
What is the 3 to 1 rule for descent?
Three nautical miles for every 1,000 ft to lose. From 10,000 ft that is 30 nm, a path of about 2.9 degrees.
Does the calculation use airspeed or ground speed?
Ground speed. A headwind shortens the distance covered per minute, a tailwind lengthens it.
Can E6B Calc tell me the rate to make a fix?
Yes. Add Distance to the fix on the Climb & Descent screen and it shows the Required descent rate.

You might also like

More E6B Calc guides