Weld all around, field weld and finish symbols
Three small marks add a lot to a welding symbol. A circle at the bend means weld all around, a flag means the weld is made on site, and a curve or line beside the symbol sets the finish of the weld face.
The supplementary symbols
| Mark | Where it sits | What it tells you |
|---|---|---|
| Weld all around | Circle at the bend of the reference line | The weld continues all the way around the joint |
| Field weld | Flag at the bend of the reference line | The weld is made on site, not in the shop |
| Flush contour | Straight line beside the weld symbol | The weld face is finished flat |
| Convex contour | Arc bulging away from the weld | The weld face is finished convex |
| Concave contour | Arc bowing toward the weld | The weld face is finished concave |
| Melt-through | Filled half circle opposite the groove | The root must melt through so the weld shows on the back |
| Back / backing | Half circle opposite the groove | A back weld on the root side, or backing material behind the joint |
Finish letters
A letter beside the contour mark names the finishing method: G grinding, M machining, C chipping, R rolling, H hammering and P planishing. A fillet with a flush mark and a G is welded and then ground flat.
Putting it together
Marks combine on one symbol. A fillet triangle with a circle at the bend, a flag next to it and a flush line with G reads: fillet weld all the way around the joint, made in the field, ground flush. For back or backing, the letters M (permanent) or R (removable) can specify the backing.
Check them in WeldMaster
- Open Weld Symbols from Reference, then Read a weld symbol.
- Under Decoder pick a Symbol and switch on Weld all around or Field weld.
- Go back and open Supplementary symbols for the contour marks, melt-through and backing, each with its description.
Questions and answers
What does the circle on a welding symbol mean?
Weld all around: the weld continues all the way around the joint.
What does the flag on a welding symbol mean?
A field weld, made on site rather than in the shop.
What do G, M and C mean next to a contour mark?
The finishing method: G is grinding, M machining and C chipping. R, H and P stand for rolling, hammering and planishing.
What is a melt-through symbol?
A filled half circle opposite the groove. The root must melt through so the weld shows on the back.
You might also like
- Welding symbols chart explained: arrow side, other side and the numbers · WeldMaster
- Groove weld symbols: V, bevel, U and J · WeldMaster
- Fillet weld symbol: what the size and length numbers mean · WeldMaster
More WeldMaster guides
- MIG welding settings chart: voltage, wire speed and gas by metal thickness
- Flux core welding settings and polarity: gasless vs dual shield
- Stick welding amperage chart for 6010, 6011, 6013, 7014, 7018 and 7024 rods
- Carbon equivalent formula and preheat temperature for welding A36, 4140 and carbon steel
- MIG porosity, spatter and burn-through: causes and how to fix them
- All questions about WeldMaster
- Back to WeldMaster